BFT Argo BT A20 Compatible Control Board

BFT Argo BT A20 Control Board – 24V DC Swing Gate Motor Replacement Control Panel

This replacement control board, designed for BFT Argo BT A20 series swing gate motors, is the main circuit board responsible for all electronic management functions of the system. The board accepts 230V AC mains voltage and provides 24V DC output to the motor; it directly manages core motion control functions such as automatic closing timer, slow start/slow stop ramp control, and step-by-step operating mode. With an IP54 protection rating, the board is suitable for enclosure mounting and is resistant to moisture and dust conditions. The integrated D-Track compatible torque monitoring module analyzes instantaneous load changes during gate movement to activate the obstacle detection function, protecting both the gate mechanism and any objects encountered. In addition to photocell, stop button, safety edge, and manual control inputs, accessory outputs for a flasher, electromechanical lock, and courtesy light are also integrated on the board. Should the control board fail, the entire system will inevitably become inoperable even if the motor remains physically intact; therefore, board replacement is the primary intervention step in systems experiencing performance loss or diagnosed with an electronic fault.

Replacing this control board is of MEDIUM difficulty. While removing the old board and installing the new one may seem mechanically straightforward, correctly connecting the cable groups on the board (motor phases, safety inputs, accessory outputs) to the proper terminals requires care and basic electrical knowledge. Furthermore, after replacement, parameters such as automatic closing time, slow travel distance, and torque sensitivity must be reconfigured according to the installation environment; if this calibration step is skipped, the system may not operate safely. It is recommended that the procedure be carried out by an authorized BFT service technician or an experienced automation installation specialist.

This control board is an original spare part manufactured by BFT S.p.A. BFT, headquartered in Italy, is a well-established industrial automation brand that has been active in the field of gate and barrier automation systems since 1981, with production facilities located in the Vigonovo/Venice region. Identified by stock code BFT-I700091-10001, this part offers full compliance with original manufacturing specifications, a 2-year manufacturer's warranty, and guaranteed complete electronic compatibility with the Argo BT A20 system. Unlike aftermarket or third-party boards, the original BFT board fully restores your system's factory performance parameters and safety functions.