Nice Robus 600 (Old Series) Sliding Gate Motor (XXL Kit)

The total weight, length and daily opening frequency of your door are three important determining factors. The weight should be chosen with a certain safety margin, attention should be paid to the length limit, and you should choose an AC motor for detached locations and a 24V DC motor for high-traffic areas. For more detailed information, you can visit our sliding door motor selection guide or contact us for further information.

All Nice sliding gate motor models feature a manual override mechanism. You can open the cover on the motor using the key supplied with the product, switch the motor to manual mode, and push the door by hand. Additionally, for Nice products with 24V DC voltage, you can opt for an external battery kit, allowing you to continue using the system during power outages.

Our products feature safety photocells and intelligent obstacle detection technology. The Nice Robus and Run series perform precise detection with the smart obstacle detection system and immediately detect and retract. Other series minimise damage as the power setting is low. Of course, this applies to situations where the sensors cannot see. If there is an obstacle (vehicle, person) in between, the sensors detect it and the motor stops and reopens. It provides flawless security for most areas.

Installation requires knowledge of welding and electricity. Incorrect installation may void the product warranty. We recommend seeking assistance from our technical team or utilising our professional installation service. Alternatively, you may purchase our pre-programming service along with the product, allowing you to engage a local welding specialist for the mechanical installation in your area while having the programming completed by us in advance. This is generally the most economical and straightforward solution.

Nice products are covered by a 2-year official distributor warranty, provided they are installed correctly. In the event of a fault, the product is sent to us and then to the distributor. In the case of manufacturing defects, parts are replaced or repaired with the distributor's approval and returned to you free of charge. If the issue is not covered by the warranty, the total repair cost is calculated and shipped with your approval. In addition to the warranty, you can always avail of this repair service.