Nice PRWNG05 Internal Gear Set (Original Spare Part Compatible with Wingo 2024 and 3524)

Nice Wingo 2024 / 3524 Internal Gear Set – PRWNG05 Original Spare Part

Nice PRWNG05 is the original internal gear set manufactured for Nice Wingo 2024 and Nice Wingo 3524 series swing (arm-type) gate motors. This gear assembly forms a critical link in the reduction chain that mechanically transfers the rotational movement of the motor shaft to the gate arm; faults such as wear, breakage, or tooth skipping directly result in the gate failing to move or a loss of closing/opening force.

The set consists of gears manufactured from a combination of high-strength engineering plastic and metal alloy, with dimensions and tooth profiles suitable for the low-voltage (24 V DC) drive system of the Wingo series. During long-term use, especially after high-frequency operating cycles or mechanical impacts on the gate, it is recommended to inspect this part and replace it if necessary.

Replacing this gear set is rated as DIFFICULT. It requires disassembling the motor housing, removing multiple fasteners in a specific sequence to access the internal mechanism, and seating the gear assembly in the correct position within the reduction unit. Incorrect installation or incomplete connections may cause permanent damage to the motor's reduction group or disrupt the gate balance; therefore, it is strongly recommended that installation be carried out by an authorized Nice service center or an experienced automation technician.

This spare part is a 100% original (OEM) product manufactured by Nice S.p.A., based in Italy. Nice is a well-established Italian brand globally recognized in the field of gate and barrier automation systems, regarded as an industry reference for its quality and reliability standards. Choosing the original Nice PRWNG05 part eliminates the risks of incompatibility and premature failure that alternative products may cause, allowing your motor to regain its original performance.